home *** CD-ROM | disk | FTP | other *** search
/ The Original Shareware 1.1 / The Original Shareware (WeMake CDs)(Volume 1.1)(CDs, Inc)(1993).iso / 36 / qemmtech.zip / WINDOWS.TEC < prev   
Text File  |  1990-09-18  |  7KB  |  145 lines

  1. ID:WN Microsoft Windows and Applications
  2. Quarterdeck Technical Note
  3. by Stan Young
  4.  
  5. Note:  This technote covers only Windows 2, Windows 386 and Windows 
  6. Runtime applications.  If you are interested in running Windows 3 with 
  7. Quarterdeck products, obtain our WIN3.TEC technote.
  8.  
  9.                      ***  QEMM-386 4.2  ***
  10.  
  11. Using QEMM-386 4.2 with Microsoft Windows 2.1 and EXCEL 2.1
  12.  
  13. If you have QEMM.SYS in your CONFIG.SYS file, Windows 2.1 will 
  14. refuse to install itself.  We have not found a conflict, so 
  15. you should try to overcome this restriction.  One way to do this 
  16. is to edit your CONFIG.SYS file so that the line:
  17.  
  18. DEVICE=QEMM.SYS {with existing switches}
  19. says instead:
  20.  
  21. REM DEVICE=QEMM.SYS {existing switches} EXT=64
  22.  
  23. Install Windows normally and then edit the QEMM line of the 
  24. CONFIG.SYS file to remove the REM statement before QEMM.SYS.  If 
  25. the Windows installation has added a device called HIMEM.SYS to 
  26. your CONFIG.SYS file, move the line that specifies the HIMEM.SYS 
  27. driver so that it loads after QEMM.SYS.  You SHOULD NOT reboot 
  28. the machine, so Windows install will see that you have expanded 
  29. memory.  It is enough that the REM statement is put before the 
  30. QEMM line.  After you install Windows, be sure to remove the REM 
  31. statement.
  32.  
  33. ------------------------
  34. QEMM-386 and Windows 386
  35.  
  36. Windows 386 and QEMM-386 are not compatible.  This is because 
  37. Windows 386 does its own memory management of the memory above
  38. 640K.  You may, however, run QEMM-386 with Windows 286 or Windows 
  39. Run-time programs (such as PageMaker) on a 386 machine and 
  40. Windows 286 can take full advantage of the memory provided by 
  41. QEMM.  Operation in this fashion provides expanded memory for 
  42. programs whether they are running in Windows or not, while 
  43. providing full support for Windows 286's desire for EMS 4.0 
  44. compatible memory.  The WIN86.COM program provided with Windows 
  45. 386 is a subset of Windows 286 and can be run with QEMM-386.
  46.  
  47. ----------------------------------------------
  48. Using QEMM-386 4.2 with Microsoft Windows 2.03
  49.  
  50. Microsoft Windows 2.03 cannot tolerate more than 1 mappable area 
  51. larger than 48K, between 640K and 1MB.  Use the QEMM.COM program 
  52. to see what areas are available above A000.  If more than one 
  53. area larger than 48K is "Mappable", then you will need to use
  54. either the EXCLUDE or RAM parameter to keep QEMM from reporting 
  55. more than 1 area larger than 48K to Windows.  It's not necessary 
  56. to EXCLUDE or RAM all of the memory, just enough to make the 
  57. mappable memory sizes less than 48K.  If you don't do this, 
  58. Windows will start but will not run any programs.
  59.                      ***  DESQview 2.2  ***
  60.  
  61. Running Windows 286 in DESQview:
  62.  
  63. First, you will want to set up Windows so that it does not 
  64. implement the HIMEM.SYS driver.  This is because the same memory
  65. area that is used by Windows to obtain 60K of extra usable memory 
  66. will be used by QEMM to give 60K of extra memory for ALL windows, 
  67. not just the Windows window, so it makes sense to have QEMM 
  68. manage this memory.  To bypass Window's use of the HIMEM.SYS 
  69. driver, you should install Windows as shown above and when it 
  70. comes to the section of the Windows install where it asks if you 
  71. "want to use extended memory for Windows", answer "No".  Windows 
  72. will not install the HIMEM.SYS driver.
  73.  
  74. Your CONFIG.SYS file would not require the "EXT=64" parameter as 
  75. shown above, since the memory for HIMEM.SYS need not be reserved.
  76.  
  77. It is also possible to simply remove the HIMEM.SYS driver from 
  78. your CONFIG.SYS driver without reinstalling Windows.  When 
  79. started in this fashion, Windows will always report an error 
  80. message saying "Your memory configuration has changed...", but 
  81. you can simply hit escape to continue, with no further problem.
  82.  
  83. In a sense, Windows and Windows applications run in DESQview 
  84. windows just as any other large graphics based applications do 
  85. and their installation can be approached from that standpoint.
  86. Only Windows 286 (not Windows 386) can be run in DESQview, and it
  87. is important that Windows be operating in a display mode that is 
  88. supported by DESQview's video drivers and that you are able to 
  89. open a window with sufficient memory (approximately 450K), but 
  90. those are the only requirements.
  91.  
  92. Windows and many Windows applications are not shown as selections 
  93. on the DESQview Add a Program menu, but can be easily configured 
  94. by adding the "PageMaker" entry from Add a Program and then using 
  95. Change a Program, modifying the "Program Name", "Program" and 
  96. "Directory" fields to be correct for the specific application.  
  97. All other settings should be correct.
  98.  
  99. Please also note that you should use the "Maximum Expanded 
  100. Memory" field in Change a Program to limit the amount of expanded 
  101. memory the Windows application can take, or it will take it all.  
  102. This will cause unnecessary swapping to disk, even on systems 
  103. with large amounts of memory.  Judging the amount to set as 
  104. maximum depends on the size of the data you have, but you should 
  105. be able to determine this by running the program and loading your 
  106. largest data file and see how much it takes.
  107. ____________________________
  108.  
  109. Windows 2.1 Runtime
  110.  
  111. The runtime version of Windows 2.1 which comes with some Windows 
  112. specific applications searches the path for WIN.COM and if it 
  113. finds it loads the full copy of Windows.  This will be a problem 
  114. when running QEMM or DESQview if the WIN.COM it finds is Windows 
  115. 386, for the reasons stated above.  If you have this problem, 
  116. rename the file WIN.COM to WIND.COM.  This will allow your 
  117. runtime programs to load properly.
  118. _____________________________________
  119.  
  120. Hint for loading Windows applications
  121.  
  122. Windows applications which don't come with a Windows run-time normally
  123. have to be run from the Windows MS-DOS executive.  This makes an extra
  124. step when loading, taking time and creating extra overhead (for the
  125. Executive).  It appears you can load faster, and preserve more memory
  126. for the application, by using a little-known and perhaps undocumented
  127. loading method.  Windows supports loading directly into an application
  128. without loading the MS DOS Executive as follows:
  129.  
  130. WIN :C:\PROGRAM\progname.exe
  131.  
  132. assuming the application was program.exe and the directory was 
  133. C:\PROGRAM.  The key seems to be that the parameter starts with a 
  134. colon.  
  135.  
  136. This makes particular sense when loading the programs in DESQview 
  137. windows, because it allows the programs to load directly, just 
  138. like other graphics programs.  To load in this fashion in a 
  139. DESQview window, the "Program" field would be WIN.COM and the 
  140. "Parameters" field would be :C:\PROGRAM\program.exe.
  141.  
  142.         Copyright (C) 1990 by Quarterdeck Office Systems
  143.              * * *   E N D   O F   F I L E    * * * 
  144.  
  145.